Hersteller: Lupus Electronics

LUPUSNET 1 Kanal POE Injektor

Art.Nr.: Lupus - 10808

Hersteller: Lupus Electronics

EUR 44,55 (-19 %)
inkl. 19 % USt Preis ab 1000 EUR Umsatz 40.54 Eur

  • Sofort versandfähig, ausreichende Stückzahl Sofort versandfähig, ausreichende Stückzahl
  • Gewicht 1.00 kg


Zu diesem Artikel existieren noch keine Bewertungen


Der LUPUSNET POE Injektor arbeitet nach IEEE802.3af und kann somit eine POE fähige Kamera über das Netzwerkkabel mit Strom versorgen. Empfohlen wird ein CAT6 Netzwerkkabel. 

Technische Daten


Security Camera with Pan/ Tilt/ Zoom IP Print Servers


Fully Compliant with IEEE802.3af 10/100/1000 base T compatible; Full ProtectionOCP, OVP
Full Power of 15.4W per port Cisco AP1250 Full Power Support; rack mount possible
Cisco: no extern parts required for Legacy devices: VoIP Phones (7910, 7912, 7940, 7960)
Access points (350, 1100, 1200)


Isolation Test Primary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute, Output to F.G.: 2121VDC for 1 minute
Insulation Resistance Primary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC


DC Output 56V @ 15.4W per port
Regulation Functional requirements of IEEE802.3af


AC Input Voltage Range 90 to 264 VAC
Leakage Current 3.5 mA max @ 254 VAC 60 Hz
AC Input Frequency 47-63 Hz
AC Inrush Current 30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC
AC Input Current 2.5A for 90VAC / 1.3A for 240VAC


Effi ciency 75% (typical) at max. load and 120VAC 60Hz
Hold-up Time 16mS min. 120VAC and max. load
Transient O/P Voltage Protection 60V max. at switch on and off at any AC line Phase
Turn-On Delay Time 3 sec max. at max. load, and 120VAC 60Hz, 25Hz
Regulation Functional requirements of IEEE802.3af


Conducted & radiated Emission EN55022 Class A, FCC Class A with UTP Cabling
EN55022 Class B, FCC Class B with FTP Cabling
Immunity EN50082-1 ESD EN61000-4-2. Level 3
RS EN61000-4-3. Level 2
EFT EN61000-4-4. Level 2
Surge EN61000-4-5. Level 3
CS EN61000-4-6. Level 2
Voltage Dips EN61000-4-11
Harmonic EN61000-3-2 Class A


Temperature Operation 0 to +40°C, Non-operation -25 to +65°C
Humidity Operation 5 to 90%