Produktbeschreibung
Der LUPUSNET POE 480 unterstützt bis zu 24 Anschlüsse, welche über das Netzwerkkabel jeweils eine Kamera mit Strom versorgen. Der Injektor ist nach
IEEE802.3afkompatibel. Das Gerät unterstützt Geschwindigkeiten bis 1 Gigabit. Zusätzlich besitzt das Gerät noch eine optionale NIC Schnittstelle ( CISCO ) und eine GUI Oberfläche zur Diagnose und Fernzugriff. Beim Standmodell ist der Zugriff über USB.
Der hier angebotene Injektor hat 16 POE Ports
Technische Daten
Anwendungen |
|
IP Telephones; Wireless Network Access Points | Lighting Systems with Single UPS; Security Systems |
FEATURES |
|
Fully Compliant with IEEE802.3af | 10/100/1000 base T compatible |
Full Power of 370-15,4W per port; Cisco Legacy detection | Full Protection OTP, OCP, OVP; 48V RPS Input (optional) |
SAFETY |
|
Isolation Test | Primary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute Output to F.G.: 2121VDC for 1 minute |
Insulation Resistance | Primary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC |
INPUT |
|
AC Input Voltage Range | 90 to 264 VAC |
Leakage Current | 3.5 mA max @ 254 VAC 60 Hz |
AC Input Frequency | 47-63 Hz |
AC Inrush Current | 30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC |
AC Input Current | 5.5A for 90VAC / 2.75A for 240VAC |
GENERAL |
|
Efficiency | 75% (typical) at max. load and 120VAC 60Hz |
Hold-up Time | 16mS min. 120VAC and max. load |
Transient O/P Voltage Protection | 60V max. at switch on and off at any AC line Phase |
Turn-On Delay Time | 3 sec max. at max. load, and 120VAC 60Hz, 25Hz |
USB Diagnostics Port | USB “B” port for diagnostics & manual port control Windows GUI |
Regulation | Functional requirements of IEEE802.3af |
EMC |
|
Conducted & radiated Emission | EN55022 Class A, FCC Class A with UTP Cabling EN55022 Class B, FCC Class B with FTP Cabling |
Immunity EN50082-1 | ESD EN61000-4-2. Level 3 RS EN61000-4-3. Level 2 EFT EN61000-4-4. Level 2 Surge EN61000-4-5. Level 3 CS EN61000-4-6. Level 2 Voltage Dips EN61000-4-11 Harmonic EN61000-3-2 Class A |
ENVIRONMENTAL |
|
Temperature | Operation 0 to +40°C, Non-operation -25 to +65°C |
Humidity | Operation 5 to 90% |
Bewertung(en)